Centrifugal Barrel Finishing Machines

Request a Quote
CBF finishing & debur toolMass Finishing, Inc. offers centrifugal barrel finishing machines in a wide variety of sizes to fit any production need.

The industry standard in fast polishing and deburring.

HZ High Energy series Centrifugal Barrel Finishing (CBF) systems from Mass Finishing are the fastest and most economical form of finishing machine available. They are the industry workhorse in polishing, deburring and deflashing parts. From jet engine blades in the aerospace industry to heart valves and medical implants, these tumbling machines are the versatile and money-saving solution for polishing and deburring.

HZ 120 finishing & debur toolHZ 120 featuring all available options and safety upgrades

In a matter of minutes this deburr tool can clean up metal, acrylic or rubber parts are finished in what could take hours or even days by hand. The finish achieved by these machines is isotropic, meaning parts are polished uniformly and evenly, something that cannot be achieved by hand. Variable speed control allow these tumbling machines to achieve whatever finish the operator desires, from a simple polish at low speed, to full scale deburring and edge radiusing.

CBF Machines from Mass Finishing vary in size from the compact, table-top HZ-12 to the super-sized HZ-330. Custom barrel sizes and specifications are available upon request. Check out our HZ Series page for the specifications on the individual models. These finishing and deburr tools are built for heavy use with industrial ball bearings and hot poured polyurethane barrel liners that can stand up to wear of running repeated finishing cycles.

CBF finishing & deburring systemCBF machines operate on the Ferris wheel principle

How It Works:

Each tumbling machine contains four barrels that are mounted to a drum. The operator fills the barrel with media, parts and water, roughly 50-90% full. During operation the entire drum of the debur tool rotates like a Ferris wheel. As the speed increases, the media and parts rub against one another randomly and repeatedly, removing even the smallest imperfections. In a matter of minutes the finishing cycle is complete and the parts are ready to be separated from the media.

Contact us today to find out if our Centrifugal Barrel Finishing Machines will fulfill your deburring needs or fill out our request a quote form. We also process sample parts for free, just click here. Learn about our financing plans through U.S. Bank here.

Model

Volume

Barrel Dimensions Overall Dimensions Motor
HZ-12 .4 cubic feet 8 ½” L x 5” diameter 34” x 30” x 30” 1 hp

 HZ-30 2S

1 cubic foot  9-3/4"L x 5 7/8" diameter   47" x 38" x 49"  3 hp

HZ-40

1.4 cubic feet 12 ¾"L x 6 7/8" diameter  47" x 37" x 49" 3 hp

HZ-60 

2 cubic feet 24 3/4"L x 5 5/8" diameter 40" x 68" x 90" 5 hp

HZ-80

2.6 cubic feet 16"L x 8 ½" diameter 56" x 54" x 76" 7.5 hp

HZ-120

4.0 cubic feet 17 ¼" L x 10 ¼" diameter 66" x 54" x 76" 10 hp

HZ-160

5.5 cubic feet 20 ¾"L x 12" diameter 70" x 54" x 76" 15 hp

HZ-220

9.67 cubic feet 27 ½"L x 11 ½" diameter 75" x 54" x 76" 15 hp

HZ-330

10.5 cubic feet 42"L x 12" diameter 90" x 56" x 80" 25 hp